ETAS ES800 - Configurable Parameters and Functions; Web Interface Structure

84 | Functions of the System
ETAS ES800 System | User Guide
Configuring Modules within a Module Stack
If the modules of a module stack are to be configured in the Web interface, the
modules must be configured in succession.
11.6.2 Web Interface Structure
This page can be opened in the Web interface of the modules ES830.1 and ES88x/
ES89x:
- Home (start page)
- Configuration
• Function of interfaces (ES882.x, ES886.x, ES891.x, ES892.x)
• Wake-Up and Keep Alive (all modules)
• Network
• Export/ Import (ES882.x, ES886.x, ES891.x, ES892.x)
• Model Runtime (ES830.1)
• Model Logging (ES830.1)
• Factory Defaults (all modules)
- Diagnostics
• Fault Memory (display for ETAS support only)
• Device Info (all modules)
- Help
• Information about licenses and Open Source software
11.6.3 Configurable Parameters and Functions
The following parameters and functions can be configured in the Web interface of
the modules ES830.1 and ES88x/ ES89x:
- Configuration of network parameters
- Selection of the function of connections
- Configuration of the "Wake-Up" and "Keep Alive" functions.
NOTE
Select a module from a module stack for configuration by clicking on it in the web
interface.