ETAS ES800 - Overview; ES800 System

22 | ES800 System
ETAS ES800 System | User Guide
3 ES800 System
This chapter contains information about the following topics:
• Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• ES800 Module and Module Stacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• System Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Modules of the ES800 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Interfaces of the ES800 Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Combination with ETAS Modules from other Series. . . . . . . . . . . . . . . . . . . . . . . 27
• Properties of the ES800 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.1 Overview
The modular ES800 system is a universally applicable development and experi-
mental platform for the calibration, diagnostics and flash programming of ECUs as
well as bus monitoring. It is designed for complex application tasks with high data
throughput and easily scalable for every power demand.
The ES800 system comprises an ECU and Bus Interface Modules for connecting
ECUs and vehicle networks, a Drive Recorder for the autonomous recording of
measured data as well as a Rapid Prototyping Module.
The ECU and Bus Interface Modules of the ES800 system supports Automotive
Ethernet-based vehicle buses, FlexRay, CAN FD, CAN and LIN as well as ETK ECU
access and can communicate with ECUs via emulator test probes (FETK, XETK,
BR_XETK, Dual Mode ETK). ECUs that feature a separate Ethernet interface can be
connected directly to ES800 modules.
The ES800 system is connected to the host, i.e., ,a PC or Drive Recorder, via Ether-
net and is integrated in the measuring setup via the ETAS Ethernet topology.
The modules in the system stack communicate via the integrated system inter-
face; no connecting cables are required.
The Drive Recorder ES820.1 can be directly connected to ES800 modules and/or
module stacks or to other Ethernet-based modules via a cable.
The ES800 system with the ETAS synchronization mechanism or with the synchro-
nization according to IEEE1588-2008 ensures a time-synchronous scanning of all
measuring channels, even in larger module arrangements. The bus interfaces of
the modules are integrated into the measuring setup with ETAS standard cables.