ETAS ES800 - Transport; Maintenance; Repairs

18 | Safety Information
ETAS ES800 System | User Guide
- Do not connect the connector and connection by force.
For detailed information about cables and cabling, see the user manual for the
product.
Accessories
Use ETAS accessories, accessories recommended by ETAS or other accessories
certified for the application. For detailed information about accessories, see the
product's user manual.
1.3.5 Transport
- Only transport and store the product with the protective flap closed and the
protective cap attached.
- Separate the module group before transportation.
- Only transport the product individually.
- Remove all connected cables before transportation.
- Do not transport the product by the connected cables.
- ES820.1: Only transport and store the product with the memory slot closed.
1.3.6 Maintenance
Cleaning
- Only clean the product when it is de-energized.
- Only clean the product with protective flap closed and the protective cap
attached.
- Do not use compressed air to clean the fans.
- Do not use cleaning agents that could harm the product.
- Do not apply cleaning agents directly onto the product.
- Use a dry or slightly dampened, soft, lint-free cloth.
- Make sure that no moisture enters the product.
- ES820.1: Only clean the product with the memory slot closed.
1.3.7 Repairs
If repairs are required, send the product to ETAS.
NOTICE
Damage to the electronics
ES820.1, ES830.1: The ground contacts of the "I/O" interface must not be con-
nected to the vehicle ground.