ETAS ES800 - Marking of Interfaces and Buttons

142 |
ETAS ES800 System | User Guide
16.1.2 Marking of Interfaces and Buttons
UKCA conformity symbol (see chapter 16.5.2 on page 144)
Marking for KCC conformity, see chapter 16.5.2 on page 144
Marking for WEEE, see chapter 16.6 on page 145
Symbol Description
Marking for USB 2.0 connection
Marking for USB 3.0 connection
"Power" button for switching the module on and off
(ES820.1 and ES830.1)
Button for safely removing the memory module of the
ES820.1
Symbol Description