154 |
ETAS ES800 System | User Guide
16.9.3 Gigabit Ethernet Interface (HOST)
NOTE
The Gigabit Ethernet (HOST) interface is activated only in standalone operation
and in an ES800 module stack
only in the lowest module.
All other HOST interfaces of the module stack can neither send nor receive
Ethernet signals and are deactivated.
Connection type Upstream
Number 1 (HOST)
Connection Duplex mode;
IEEE 802.3 - 1000BASE-T,
IEEE 802.2 - 10/100BASE-TX
IP address Dynamic via INTECRIO or INCA
Synchronization IEEE1588-2008
Synchronization resolution 1 s
Electrical isolation Connection electrically isolated from mod-
ule
To Next Page
Loading...
