ETAS ES800 - Classification of Safety Messages; Safety Information; Assembly

14 | Safety Information
ETAS ES800 System | User Guide
1.2 Classification of Safety Messages
The safety messages used here warn of dangers that can lead to personal injury or
damage to property:
1.3 Safety Information
1.3.1 Assembly
Only install, connect, disconnect, and cable ETAS products and components when
they are de-energized.
Installation Location
Install the product on a smooth, level and firm surface. The inclination angle must
not be greater than 15°.
DANGER
indicates a hazardous situation with a high risk of death or serious injury if not
avoided
WARNING
indicates a hazardous situation of medium risk which could result in death or
serious injury if not avoided.
CAUTION
indicates a hazardous situation of low risk which may result in minor or moder-
ate injury if not avoided.
NOTICE
indicates a situation which may result in damage to property if not avoided.
WARNING
The following products are Class A equipment:
- ES820.1, ES830.1, ES882.1, ES882.2, ES886.1, ES886.2
- ES891.1, ES891.2, ES892.1, ES892.2 in the power supply range of between 28 V
and 32 V DC
- This piece of equipment may cause radio interference in living areas. In this
case, the user may be required to take appropriate measures.