·126·
Operating manual
CNC 8055
CNC 8055i
7.
TABLES
·T· MODEL
SOFT: V02.2X
If on CNC power-up, it detects that any table has been damaged, it checks whether that table has
been saved in the hard disk (KeyCF) or not.
• If it is in the hard disk (KeyCF), it asks whether a to make a copy or not.
• If it is not in the hard disk (KeyCF), it asks whether a to initialize with the default values or not.
When copying one of the following tables from the hard disk (KeyCF), it resets the CNC automatically.
Zero offsets, M functions, tools, tool magazine, tool offsets, geometry, leadscrew error compensation,
cross compensation.
To Next Page
Loading...
