Operating manual
CNC 8055
CNC 8055i
CNC - PC COMMUNICATION. TELEDIAGNOSIS
14.
·T· MODEL
SOFT: V02.2X
·245·
Normal phone call
14.3 Normal phone call
It is a direct phone call between the CNC and the PC.
When pressing this softkey, the CNC displays a window to enter the phone number that the PC
modem is connected to. If necessary, one must also set the outside line accessing code, the country
code (if the PC is in another country) and the telephone extension.
Once the phone number has been entered, it is possible to make a call by selecting the telephone
icon and pressing [ENTER] or by pressing the "CALL" softkey. Likewise, to hang up, it may be done
using the icon or the "hang up" softkey.
The bottom of the screen shows the warning and error messages that come up. To establish
connection, the WinDNC of the PC must be in the call waiting mode.
To Next Page
Loading...
Need help?
General
