Fagor CNC 8055 T User Manual

·242·
Operating manual
CNC 8055
CNC 8055i
14.
CNC - PC COMMUNICATION. TELEDIAGNOSIS
·T· MODEL
SOFT: V02.2X
When the keyboard is disabled, neither the feedrate override nor the CYCLE STOP button are
disabled. These operations are carried out by activating and deactivating the corresponding icons
on the left side of the telediagnosis screen.
End of telediagnosis
To end telediagnosis, select the END icon at the WinDNC. Ending telediagnosis does not end the
connection between the PC and the CNC.
There are two ways to end the communication between the PC and the CNC; either from
the PC or from the CNC.
• From the PC select the EXIT option at the WinDNC.
• At the CNC, in the window for phone calls, press HANG UP.

Fagor CNC 8055 T Specifications

General

Brand	Fagor
Model	CNC 8055 T
Category	Power Tool
Language	English