295 Faxing
Dialing Type You can select the dialing type.
• PB
• DP (10PPS)
• DP (20PPS)
IMPORTANT:
• In New Zealand, selecting DP (10PPS) or DP (20PPS) is
prohibited.
Interval Timer You can specify the interval between transmission attempts
within the range of 3 to 255 seconds. The default is 8 seconds.
Number of Redial You can specify the number of redial attempts to make when
the destination fax number is busy, within the range of 0 to 9. If
you enter 0, the printer will not redial.
Redial Interval Your printer can automatically redial a remote fax machine if it
was busy. Intervals from 1–15 minutes can be entered.
Junk Fax Filter You can reject faxes sent from unwanted stations. The system
only accepts faxes from the remote stations registered in the
speed dial. This feature is useful for blocking any unwanted
faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on.
Remote Receive You can receive a fax by pressing the remote receive code on
the external telephone after picking up the handset of the
telephone.
Remote Rcv Tone You can specify the tone when Remote Receive is set to
On.
Send Header Prints the sender’s information on the header of faxes.
Select Off to turn this feature off.
Select On to turn this feature on.
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed
to On and cannot be changed.
For information on the country setting, see "Setting Your
Country" on page 244.
Company Name Specifies the sender’s name to be printed on the header of
faxes.
Your Fax Number Specifies the fax number of the printer, which will be printed on
the header of faxes. This feature is available when you set
Send Header to On. The number specified in Fax Number is
used in the printer ID.
Fax Cover Page You can set whether to attach a cover page to faxes when
sending faxes.
DRPD Pattern Before using the Distinctive Ring Pattern Detection (DRPD)
option, distinctive ring service must be installed on your
telephone line by the telephone company. After the telephone
company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for
that specific ring pattern.
Option Description
To Next Page
Loading...
Need help?
General
