Troubleshooting 444
031-550 Press the button, or wait for 30 seconds for the printer to recover. Check append
access right to the file. Check if server supports the SMB append command.
031-551
031-552 Press the button, or wait for 30 seconds for the printer to recover. Change the file
name that already exists on FTP server.
031-574 Press the button, or wait for 30 seconds for the printer to recover. Check DNS
connection, or check if name of forwarding destination server is registered with DNS.
031-575 Press the button, or wait for 30 seconds for the printer to recover. Set DNS address,
or set forwarding destination server address as IP address.
031-576 Press the button, or wait for 30 seconds for the printer to recover. Check if the printer
communicates with forwarding destination FTP server. For example, check
connection
of network cable and if
the IP address of the server is correct.
031-578 Press the button, or wait for 30 seconds for the printer to recover. Check if login
name (user name) and password are correct.
031-579 Press the button, or wait for 30 seconds for the printer to recover. Check if storage
location is correct.
031-580 Press the button, or wait for 30 seconds for the printer to recover. Check server
access right.
031-581 Press the button, or wait for 30 seconds for the printer to recover. Change file name
and forwarding destination folder, or move or delete file in forwarding destination folder.
031-582 Press the button, or wait for 30 seconds for the printer to recover. Check if the file
name you specified can be created in storage location. Check if storage location has
free space.
031-584 Press the button, or wait for 30 seconds for the printer to recover. Check if the folder
name you specified can be created in storage location. Check if the folder that has the
same name as the one you specified already exists.
031-585 Press the button, or wait for 30 seconds for the printer to recover. Check server
access rights.
031-587
031-588 Press the button, or wait for 30 seconds for the printer to recover. Check if storage
location has free space.
031-590 Press the button, or wait for 30 seconds for the printer to recover. Change the file
name that already exists on FTP server.
031-594 Press the button, or wait for 30 seconds for the printer to recover. Try the same
operation again. Contact customer support if this failure is repeated.
031-595
031-598 Press the button, or wait for 30 seconds for the printer to recover. Check append
access right to the file and if server supports the FTP append command.
031-599 Press the button, or wait for 30 seconds for the printer to recover. Check rename
access right to the file. Check if server supports the FTP rename command.
033-513 Press the button, or wait for 30 seconds for the printer to recover. Try the following:
• Print the received fax, or wait for a while until sending a fax is completed.
• Print the fax job stored using the Secure Receive feature.
NOTE:
• For more information on the Secure Receive feature, see "Using the Secure
Receiving Mode" on page 286.
033-762 Press the button, or wait for 30 seconds for the printer to recover. The printer rejects
faxes sent from unwanted numbers.
See also:
• "Junk Fax Filter" on page 320.
To Next Page
Loading...
