51 Basic Operation
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the System Settings page to confirm that the newly installed memory module is detected by
the printer.
a Press the System button.
b Select Report/List, and then press the button.
c Select System Settings, and then press the button.
The System Settings page is printed.
11 Confirm the amount of Memory Capacity listed under General in the System Settings page.
If the memory capacity has not increased, turn off the printer, unplug the power cord, and
re-install the memory module.
12 If you installed the optional memory module after installing the print driver, update your driver by
To Next Page
Loading...
Need help?
General
