Network Basics 94
• For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and
Windows Server 2003 x64 Edition
1 Click start (Start for Windows Server 2003 / Windows Server 2003 x64 Edition) → Printers and
Faxes.
2 Click Add a printer (Add Printer for Windows Server 2003 / Windows Server 2003 x64 Edition)
to launch the Add Printer Wizard.
3 Click Next.
4 Select A network printer, or a printer attached to another computer, and then click Next. If
the printer is not listed, enter the path to the printer in the text box.
The server host name is the name of the server computer that identifies it on the network. The
shared printer name is the name assigned during the server installation process.
5 Click Browse for a printer, and then click Next.
6 Select the printer, and then click Next.
If this is a new printer, you may be prompted to install a print driver. If no system driver is
available, you need to specify the path to available drivers.
7 Select Yes if you want this printer to be set as the default printer, and then click Next.
If you want to verify installation, click Yes to print a test page.
8 Click Finish.
When a test page prints successfully, installation is complete.
For example:\\<server host name>\<shared printer name>
To Next Page
Loading...
Need help?
General
