KAYENNE — User Manual 129
Button Mapping
Figure 93. Remote Aux Panel Button Map Menu
2. When multiple Remote Aux Panels are selected, changing a button’s
mapping applies that individual button’s mapping to all the selected
Remote Aux Panels.
3. Use the same button mapping procedure (page 127) to map the source
buttons on the Aux panel. Select the Aux source button in the central
pane, then select the Kayenne source in the right pane.
Note Button mapping settings for Remote Aux Panels assigned to a Control
Surface are saved to the Panel Prefs configuration file. Button mapping set-
tings for Independent Remote Aux Panels are saved to the Eng Setup config-
uration file.
To Next Page
Loading...
