86 KAYENNE — User Manual
Section 3 — System Operation
Control Panel Overview
4-ME Control Panel
The 4-ME Kayenne Control Panel is designed for large scale live produc-
tions. Sources are selected in the Source Select Modules on the left side of
each Stripe. Delegated controls for various Hold, Row Delegation, and ME
Bus selection are at the right of each Source Select Module (
Figure 66).
Transition, Keying, Local/Master E-MEM, and device control selections are
made on the following:
• KAYN-PNL-TRM - Transition Module
• KAYN-PNL-LEM - Local E-MEM Module
• KAYN-PNL-MEM - Master E-MEM Module
• KAYN-PNL-MFM - Multi-Function Module
• KAYN-PNL-SRC-35, 25, 15 - Source Select Module, available in 35, 25,
and 15 button widths.
Note 15 button widths are only available with 1-ME Control Panels.
• KAYN-PNL-BAR-35 and 25- System Bar, available in two sizes to match
various Control Panel widths.
• KAYN-PNL-DCM - Device Control Module, available as an option for
3 and 4-ME panels and as a satellite panel module.
The Kayenne Control Panel is shipped in a default configuration
(
Figure 66), however module configuration can be customized. For more
information about module configuration options, refer to the Kayenne
Installation & Service Manual.
To Next Page
Loading...
