KAYENNE — User Manual 239
iDPM Operations
All Separation — controls both horizontal and vertical separation simultane-
ously. This control is additive with the other separation controls, such that
changing its values changes the H and V separation values.
When the Separate Sides data pad is selected, individual soft knob controls
for separation are available. These controls allow movement of individual
Top, Bottom, Left, and Right portions of the split image.
Splits & Mirrors Modifiers Pane
The Splits & Mirrors Modifiers pane has mirror and double image controls.
The mirror buttons replicate the side of a picture about the axis location to
the opposite side. Mirror orientation is based on the picture’s source space.
It is possible to simultaneously reflect multiple sides by turning on the
Mirror Top, Mirror Right, Mirror Left and Mirror Bottom buttons. The original
picture for that side is always reflected. A side that has been mirrored to the
opposite side will not be mirrored a second time.
When Double Image is on, the area of separation is filled by extending the
interior sides of each half of the original split picture to the axis position. At
large separation values the picture will be doubled about the axis. This
control only has an effect when separation exists between the splits.
To Next Page
Loading...
Need help?
General
