KAYENNE — User Manual 291
Copy/Swap
tion of default. The following scenarios might exist allowing the user to
copy:
• A specific default source and a specific bus,
• A specific source to all buses,
• All sources on a specific bus,
• All sources on an ME, or
• All sources to all buses on all MEs.
Copy Swap Macro Menu
The Copy Swap Macro menu (Figure 196) is accessed by touching
Copy Swap, Macro.
Note The functionality of this menu is duplicated in the Macros, Macro Ops menu
for convenience.
Figure 196. Copy Swap Macro Menu
Macro register information can be moved from one register to another with
this menu by selecting the registers in the From and To scrolling panes, then
touching the
Copy or Swap buttons in the Macro Operations pane
(
Figure 196). The soft knobs and data pads on the upper right can be used
to quickly select specific register numbers in each pane.