360 KAYENNE — User Manual
Section 3 — System Operation
Control Panel Controls in Split Layered Mode
The Pri and Sec Control Panel buttons (on the Multi-Function Module in
iDPM mode) behave the same as they do in Split mode, with the exception
that background bus selections are not used for the partition that is in
Layered mode. The keyer source selections are allowed in Layered mode
for the keyers that are assigned to the primary or the secondary partition
delegated.
A/B bus selections do not feed backgrounds for a primary partition that is
in Layered mode.
U1/U2 bus selections do not feed backgrounds for a secondary partition
that is in Layered mode, but they can be used for key masks, video in bor
-
ders, wipe pattern source, etc.
To Next Page
Loading...
Need help?
General
