24 KAYENNE — User Manual
Section 1 — Introduction
Panel Control Unit
The Kayenne Control Panel and Menu Panel(s) are powered from a sepa-
rate rack mount Panel Control Unit (PCU). Control surface processing and
communications are handled by this unit. The PCU eliminates the need for
cooling fans in the Control Panel and Menu Panels, making for quiet
system operation.
Redundant Power Supplies
Optional built-in redundant power supplies are available for the Kayenne
4-RU and 8-RU Frames. An additional redundant power supply is stan
-
dard with the Kayenne PCU.
Supported Control Protocols
All Kayenne systems support the following control interfaces and types of
external devices:
• Serial control of VTR/DDR (BVW, AMP, and Odetics protocols),
• Ethernet control of DDR channels (AMP protocol),
• Peripheral Bus II protocol,
• Tally (Contact Closure and Serial),
• GPI Inputs and Outputs,
• Routing Control Systems (Jupiter, Encore, SMS-7000, and third party
routers), and
• Grass Valley Editor protocol.
To Next Page
Loading...
Need help?
General
