KAYENNE — User Manual 369
Macros
5. If desired, name the macro by touching the Name data pad and
entering the name in the pop-up keyboard. Press
Enter.
Playing an Attached Macro
1. Turn on the attachment playback feature by pressing the Attach Enable
button so it is illuminated. You may also want to press the
Show Attach
button so that panel buttons with macros attached can be identified
(they blink low tally).
2. Press the panel button that has the macro attached.
Removing a Macro Attachment
1. Press the Delete button on the System Bar.
1. Press the Show Attach button so that panel buttons with macros attached
blink low tally.
2. Without selecting a macro register, press the blinking button that has
the attachment you wish to remove. The blinking button will turn off.
3. Press Show Attach to turn off the mode.
To remove all macros, go to the Macros Attach menu and select Remove All
Macros
button (warning will appear to confirm remove all).
Appending to a Macro with the Control Panel
1. Turn on Macro append mode by double pressing the Rec button.
2. Press the macro register button on the delegated keyer row of an
existing macro to which you wish to append additional steps.
3. Perform the additional steps using the Control Panel and/or the
menus.
4. Complete the append by pressing the blinking Rec button, or pressing
the blinking keyer row macro register button.
Appending to a Macro in the Menu
1. Go to the Macros Catalog menu (press Macro, Catalog).
2. Touch the Macro Register number button of the register you wish to
record additional steps into.
3. Touch the Append button.
4. Perform the additional steps, using the Control Panel and/or the
menus.
5. Touch the Stop button to end the macro append.
To Next Page
Loading...
Need help?
General
