GRASS VALLEY KAYENNE - V2.0 User Manual

382 KAYENNE — User Manual
Section 3 — System Operation
5. Enter a new clip name or an existing clip name if you wish to overwrite
that clip.
6. Touch Enter.
7. Touch the Record device control button.
8. Touch the Stop device control button when the desired length of the clip
is reached.
Editing Clips
Clips can be edited in the Image Store, Clip Record and Edit menu. There
are three types of clip editing provided:
• Cut Edit,
• Build Edit, and
• Join Edit.
Cut Edit
Cut Editing allows you to edit a clip in the following ways:
• Rename Clips (use the Rename button).
• Mark a thumbnail, see Cut Edit on page 382),
• Trim and remove from the head of the clip to the Mark In point (Tr im
and Remove on page 384),
• Trim and remove from Mark Out point to the end of the clip (Trim and
Remove on page 384),
• Make sub-clips (including splitting one clip into two) from the current
clip (Make Sub-clips from the Current Clip on page 385), and
• Cut Edit while recording a clip (Cut Editing while Recording on
page 386).
For Cut Edit, touch Image Store, Replay & Record, Clip Record and Edit and touch
the
Cut button in the Edit Type mode group (Figure 240).

GRASS VALLEY KAYENNE - V2.0 Specifications

General

Brand	GRASS VALLEY
Model	KAYENNE - V2.0
Category	Recording Equipment
Language	English