GRASS VALLEY KAYENNE - V2.0 User Manual

KAYENNE — User Manual 315
Device Control Operations
Clip Run Control in Single Device Mode
The joystick provides the following clip control:
• Joystick left—Left jog,
• Joystick right—Right jog,
•Joystick up—Fast Forward,
• Joystick down—Rewind, and
• Button on top of the joystick—Mark In.
The motion control buttons in the main function area provide the fol-
lowing:
• BEGN—Places the clip at the beginning,
• END—Places the clip at the end,
• REW—Rewinds the clip,
• JOG+/JOG-—Jog forward, jog backward through the clip,
• PLAY—Play the clip from current position,
• STOP—Stop the clip,
• FF—Fast Forward through the clip,
• ADV—Off Air Advance, and
•APLY—Auto Play
The PREV and NEXT buttons performing the following:
PREV—Moves up through the Event List in the Current Clip and loads the
selected clip,
NEXT—Moves down through the Event List and loads the selected clip.
Multiple Device Control
To place the Multi-Function Module in Multiple Device Control mode,
press the
Devs button from the HOME position, then press the MULT button
located below and right of the joystick (
Figure 207) on the Multi-Function
Module (directly below the Sngl button).
Devices are configured using the Panel Prefs, Panel User Interactions
menu. Eight external devices of the 32 possible can be controlled from the
Multi-Function Module in the Multiple Device mode. Each device name is
displayed above the assigned button (D1, D2, D3, etc.).

GRASS VALLEY KAYENNE - V2.0 Specifications

General

Brand	GRASS VALLEY
Model	KAYENNE - V2.0
Category	Recording Equipment
Language	English