374 KAYENNE — User Manual
Section 3 — System Operation
Kayenne Control Panel Operation
As with other external devices, device control is possible through the
MFM (Multi-Function Module), the optional DCM (Device Control
Module), and the System Bar. Engineering names (CS-1, CS-2, etc.) appear
in the control panel displays and all motion controls provided from the
server are available.
ClipStore motion controls can be learned as part of an E-MEM.
ClipStore Menu Operations
Clip Replay
The ClipStore output channels appear in the same columnar style as in the
Stills menu (
Figure 230). Also like the Stills menu, the selected output
channel will be outlined in blue or red if on-air.
Note ClipStore channel represents a permanent Video/Key pair.
Clip replay is performed in the Image Store, Replay & Record, Clips (and
Clip Record and Edit) menu (
Figure 230).
Figure 230. Clips Menu
To Next Page
Loading...
