KAYENNE — User Manual 375
ClipStore (Image Store Clips)
Folder Selection
Touch the Current Folder data pad located just above the scrolling clip list
(
Figure 230) to change the current folder. The Folders/Clips menu is dis-
played (Figure 231).
Touch the folder you wish to be the current folder and either select a clip on
the right or press the
Cancel button (bottom right of menu, Figure 231) to
close and return to the Clips menu (if the Cancel button is touched, the
folder will still be changed but it will not result in a clip load).
Figure 231. Folders/Clips Menu Selection
Menu Clip Selection
Clips can be selected in three ways in the menu:
• Touching a clip in the scrolling clip list (Figure 230),
• Touching the
Scroll Image List data pad (Figure 230), and entering the
Image ID for the clip (ascending numeric value in the current folder).
• Touching the Current Folders data pad and then touching a clip in the
Current Clip scrolling list (Figure 231).
With the Auto Load button selected (highlighted green), the clip will be
loaded into the selected ClipStore channel.
To Next Page
Loading...
