376 KAYENNE — User Manual
Section 3 — System Operation
Clip Loading
As with Stills, to load a clip (Figure 230):
1. Turn on Auto Load by touching the Auto Load button.
Note Auto Load must be on to load a clip.
2. Touch a ClipStore channel.
3. Touch a clip in the scrolling clip list.
The clip loads to the selected channel.
The Current Thumbnail Viewer (Figure 232) displays the currently loaded
clip in the selected channel.
Figure 232. Current Thumbnail Viewer
Note When a ClipStore channel is selected and a clip is loaded, that clip will be
highlighted in
blue in the scrolling clip list (Figure 230) and the list will
automatically scroll to display the selected clip.
Clip Search
You can search for clips using the Search Clip button (Figure 230). Touching
the button displays the Search Clip keyboard. Type letters
and/or numbers (minimum 1 character) and touch Enter to execute the
search. The found clips will be listed in the scrolling clip list.
To Next Page
Loading...
