KAYENNE — User Manual 131
Button Mapping
Figure 95. Remote Aux Bus Delegation Button Mapping Menu
1. In the Panel Delegation pane, choose the Remote Aux Panel to
configure. Only one Remote Aux Panel can be selected at a time.
2. In the Logical Aux Buses pane, select the Aux Bus delegation button
you wish to map.
Note Button delegation settings for Remote Aux Panels assigned to a Control
Surface are saved to the Panel Pref configuration file. Button mapping set-
tings for Independent Remote Aux Panels are saved to the Eng Setup config-
uration file.
To Next Page
Loading...
