318 KAYENNE — User Manual
Section 3 — System Operation
Supported machine control functionality:
• Run Control:
•Play,
•Cue,
•Stop/Pause,
• Jog +/-,
•FF, REW,
• Next clip/Previous clip,
•Set mark in/out:
•Cue marks,
•Loop marks,
• Cue library (Q-MEM with 1000 Q-MEM Registers)
• Ability to recall large numbers of clips/marks
• Create virtual clips as mark in/out point within another clip
• Create assemblies of clips which span channels (for example Video
and Key and driving video walls with 4 or 8 channels),
• Ability to record a clip to a device, cue to mark-in, and add a play
command.
• Cue can be for more than one device
• Variable speed play,
• Multiple Device control:
• Swap between controlled devices,
• Channel ganging,
• Create recordings, and
•Loops:
•Stop, and
•Play.
The Device Control Module can control all configured devices with the fol-
lowing properties:
• Current Mark in/out,
• Current duration,
• Current clip name,
• Current loop flag,
• List of currently ganged devices.
To Next Page
Loading...
