404 KAYENNE — User Manual
Section 3 — System Operation
2. Touch Channel 1 to select it under the Program column, right side of
menu.
3. Touch the Input Source data pad and touch the input source for Channel 1
to select it.
4. Touch Channel 2 to select it.
5. Touch the Input Source data pad and select the input source for
Channel
2.
6. Touch the image in Channel 1 or Channel 2.
7. Touch the Video Key Pair button.
Channel 2 becomes the key and is now paired with the Channel 1 video,
creating the Video/Key pair.
Figure 253. Capturing V/K Image Pair
8. Capture the still as described in Capturing a Still from Input Video on
page 399, steps 4-8.
Marrying Two Videos as a Video/Key Pair
Two existing video images can be “Married” using the Marry button in the
Capture Still menu, to create a video/key image with the same Image Store
ID. Once married, the image will take the ID number for the video in the
odd channel.
To Next Page
Loading...
