410 KAYENNE — User Manual
Section 3 — System Operation
Figure 259. Scroll Image List Keypad
•Type dot (.) then touch Enter in the Image ID keypad to load the next
image containing content on the same output as previously selected.
• Type Image ID # +
dot (.) + Output channel # in the Image ID keypad
and touch
Enter to load the image ID to an output, for example typing
123.3 then touching Enter loads Image ID 123 on output channel 3.
Images in output can be paired by selecting the odd or even image (1&2,
3&4, 5&6) and touching the Video Key Pair button located at the top-right
of the menu (
Figure 258).
On-Air tally is represented by a red border around the image in Program
(right side of menu), otherwise the image is outlined in blue when selected
(
Figure 260).
To Next Page
Loading...
