REMOTE INTERFACE 
251 
7.  Press NetMask (F2) and set 
the mask address using the 
number pad. Press Done (F1) 
to complete setting the net 
mask.  
8.  Press Gateway (F3) and set 
the gateway address using 
the number pad. Press Done 
(F1) to complete setting the 
gateway.  
9.  Press Done (F5) to complete 
setting the manual IP address 
and to return to LAN 
interface menu. Press 
Done(F5) again. 
10. Press Host Name (F4).  
11. Enter the host name using the 
scroll wheel, arrow keys and 
soft-keys. Use the scroll 
wheel to highlight a 
character, and press Enter 
Char (F1) to select the 
highlighted character. 
12. Press Done (F5) to finish 
setting the Host Name. Press 
Done(F5) again.