GW Instek PEL-2000A Series - Display Output View; Shorting

OPERATION
123
Shorting
Background
The Short Key is used to simulate a short circuit.
1. Configure the Short settings.
Page 189
2. Select a channel on the load
module.
Page 120
Panel operation
3. Press the SHORT key to enter
the shorting modes.
SHORT
Short
Shorting
4. a. Press the SHORT key (toggle
mode).
Or
b. Hold the SHORT key (hold
mode).
SHORT
Note
The load cannot be shorted from the local load
module in Group Unit mode.
Display Output View
Background
The DISPLAY key can be used to switch the
display output to different views.
Panel operation
1. Press the DISPLAY key
repeatedly to switch between the
different views.
DISPLAY