There are two options to save or recall Memory
data to a USB flash drive:
Save Chan Current: Saves the active Channel’s
Memory data (M001~M120) into the root directory
(20XXX_XX.M). Press F5 (File Utility) to select the
directory to save.
Save Chan All: Every channel’s Memory data
(CH1 M001~120 ~ CH8 M001~M120) will be saved
into a directory (ALL00XX) as separate files for
each channel (P0X0X_C1.M ~ P0X0X_C8.M).
Recall File: Recalls the selected file to the active
channel’s Memory. It is not possible to update all
the channels at once, only one channel at a time can
be recalled.
The file extension *.M is used for Memory data
only.
For more information about the file structures see,
page 94.
To Next Page
Loading...
