GW Instek PEL-2000A Series - Interface Configuration (Settings); Configuring RS232 Connection

PEL-2000A Series User Manual
232
Interface Configuration (settings)
The Interface Configuration chapter describes configuration
settings that apply when using the PEL-2000A mainframe with a
remote connection. There are three interface options for remote
control: RS232, GPIB and USB. Only one interface can be used at a
time. For more details about remote control and interface
connections, see the Interface section on page 280.
Configuring RS232 Connection
Background
When using RS232 a number of parameters need to
be set. These include Baud rate, Stop Bit and
Parity. When setting RS232 parameters, ensure
they match that of the host machine.
Parameters
Baud Rate
2400/4800/9600/19200/38400
Stop Bit
1~2
Parity
None/Odd/Even
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F3 (Interface Menu).
F3
O
USB
Interface
ConfigureOtherInterfaceLoad
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50