GW Instek PEL-2000A Series - Adjusting the RVP Load off

OPERATION
229
4. Press the Selector knob to edit
Jog Shuttle Control, then turn to
change from OFF to ON and vice
versa.
Jog Shuttle Control OFF
5. Press the Selector knob or Enter to confirm
selection.
Adjusting the RVP Load Off
Background
ON: When RVP is detected, Alarm will display on
the screen and stop loading.
OFF: When RVP is detected, Alarm will display
on the screen but loading is kept on.
Note
This setting applies to all channels. But each channel
independently detects RVP and performs the action of
emitting alarm and stopping load.
Parameter
RVP Load Off
ON/OFF
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5