GW Instek PEL-2000A Series - Quick Preset Recall;Save

OPERATION
273
If you try to recall data that originated from a different
load module than the active channel, an error message
will appear. The filename must reflect the active
channel’s load module type.
Machine Type Error
Quick Preset Recall/Save
Background
The PEL-2000A series mainframes have up to 10
Channel Presets (P0~P9). Quick recalling or saving
presets will only be applicable to the active
channel. For example, P1 on CH1 is not the same
as P1 on CH2.
Parameter
Presets
P0 ~ P9 (current channel)
Panel Operation
1. Remove any USB devices from
the front panel.
2. Select the channel you want to
save Channel Presets to.
Page 126.
Save Current
Channel Preset
3. To save a Channel Preset, press
the Preset key and hold one of
the number keys (0-9) for a short
time until a beep is heard.
0 = P0
1= P1 etc.
0
P0
PRESET
Save All Channel
Presets
4. To save All Channel Presets,
press the Shift key, the Preset
key and hold one of the number
keys (0-9) for a short time until a
beep is heard.
0 = P0
1= P1 etc.
PRESET
SHIFT
0
P0
5. Press the Preset key again to
deactivate it.
PRESET
PRESET