GW Instek PEL-2000A Series - Recall Setup Memory (Frame Link)

PEL-2000A Series User Manual
274
The Preset will be saved to the one of 10 presets
depending on the number pressed.
Recall Current
Channel Preset
6. Press the Preset key and one of
the number keys.
0 = P0
1= P0 etc.
Only the current Channel
preset will be recalled.
0
P0
PRESET
Recall All Channel
Presets
7. Press the Shift key, the Preset
key and one of the number keys.
0 = P0
1= P0 etc.
PRESET
SHIFT
0
P0
8. Press the Preset key again to
deactivate it.
PRESET
PRESET
Recall Setup Memory (Frame link).
Background
A master mainframe can command all mainframes
(master and slave) to recall setup memory from
their internal memory. No setup data will be
recalled from the master mainframe to the slave
units.
Parameter
Setup memory
1~4.
Panel Operation
1. On the Master mainframe,
follow the procedure for
recalling setup memory for all
channels.
Page 248
All mainframes will update setup memory upon
recall.
Note
It is necessary to save setup data before recalling both
master and slave. If the setup data is not saved first,
there will be no value change after recalling.