GW Instek PEL-2000A Series - View Language Settings

PEL-2000A Series User Manual
220
2. Press F5 (Other Menu).
F5
ConfigureOther
Other Setting
Alarm Tone(S)
Knob Type
Go-NoGo Tone
Slave Knob
Language
OFF
Updated
OFF
SetValue
English
Load Interface
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50
3. Use the Selector knob to move
the cursor down to Slave Knob
(below the initial screen).
4. Press the Selector Knob to
highlight Slave Knob, then turn
to change to Measure/SetValue.
Slave Knob SetValue
5. Press the Selector Knob or Enter
to confirm selection.
OR
ENTER
View Language Settings
Background
The language settings can be viewed in the
Utilities menu.
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT