GW Instek PEL-2000A Series - Mainframe Configuration; Accessing System Information

PEL-2000A Series User Manual
208
Mainframe Configuration
The Mainframe Configuration chapter describes configuration
settings that apply to all channels and general interface settings.
Accessing System Information
Background
The System Information displays the mainframe
and load module(s) serial numbers.
Parameters
MainFrame Ver:
Mainframe firmware version.
PEL-200X SN:
Mainframe Serial number.
SlotX(Y)Ver:
The version number of the Xth
load module occupying the Xth
slot with channel number Y.
PEL-20XX SN:
The serial number and module
model of the Xth load module
Y designates the channel of each installed load
module. For example if dual channel load
modules are installed, then Ch (1,2) will be used
for the firmware and serial number.
Panel operation
1. Press the Shift Key then the Help
key to access the Utility
menu/System Info menu.
UTILITY
HELP
SHIFT