GW Instek PEL-2000A Series - Configure Frame Link Interface

PEL-2000A Series User Manual
286
Configure Frame Link Interface
Connection
Connect the Frame link cable
(MIL 20 pin connector) to the
rear panel port: 20-pin male
connector.
2
1
FRAME CONT
Pin assignment
(Frame link
connector 1)
20
19
2
1
Pin
number
Pin name
Description
Pin1
A
Input, Recall Preset
memory 0 (All channels)
Pin2
B
Input, Recall Preset
memory 1 (All channels)
Pin3
C
Input, Recall Preset
memory 2 (All channels)
Pin4
TRIG_IN
Trigger input
Pin5
MEM_1
Input, Recall Setup
memory 1 (All channels)
Pin6
MEM_2
Input, Recall Setup
memory 2 (All channels)
Pin7
MEM_3
Input, Recall Setup
memory 3 (All channels)
Pin8
MEM_4
Input, Recall Setup
memory 4 (All channels)
Pin9
Enable
Input, Enable Load
(On/Off), recall Preset
memory (0-2) and Setup
memory (1-4)