GW Instek PEL-2000A Series - Default Settings

PEL-2000A Series User Manual
302
Default Settings
Menu Item
CC Mode
Range: High
Mode: Static
A/B Value: Min A
Rising Slew Rate: Max
Falling Slew Rate: Max
CR Mode
Range: High
Mode: Static
A/B Value: Max Ω
Rising Slew Rate: Max
Falling Slew Rate: Max
CV Mode
Range: High
Response: Slow
A/B Value: Max V
I Meas: High
Curr Limit: Max A
CP Mode
Range: High
A/B Value: Min W
Curr Limit: Max A
CHAN-Protection
OCP Level: Max
OCP Setting: OFF
OVP Level: Max
OVP Setting: OFF
OPP Level: Max
OPP Setting: OFF
UVP Level: OFF
UVP Setting: Clear
Protection Clear: All
CHAN- Other
CC Vrange: High
Von Voltage: 0V
Von Latch: OFF
CH CONT: Panel
Independent: OFF
Load D-Time: 0.0s
Response: Fast
CCH Step: Min
CCL Step: Min
CRH Step: Min
CRL Step: Min
CVH Step: Min
CVL Step: Min
CPH Step: Min
CPL Step: Min
Short Function: ON
Short Key: Toggle
Short Safety: ON