GW Instek PEL-2000A Series - Main Features

GETTING STARTED
13
Main Features
Description
The PEL-2002A and PEL-2004A are multichannel
programmable DC electronic load mainframes.
The PEL-2002A mainframe is able to hold 2 load
modules, whilst the PEL-2004A is able to hold 4.
The flexible module configuration allows the
mainframes to either sink multiple loads
independently or large loads when used in
parallel.
The PEL-2000A series support four operation
modes: constant current (CC), constant voltage
(CV and CV+CC), constant resistance (CR) and
constant power (CP). Constant current and
constant resistance mode can operate in either
static or dynamic mode.
Feature Overview
 Flexible operation with removable load
modules.
 Multiple independent isolated channels.
 High performance, up to 5 digit resolution.
 High slew rate enabling a high response speed
 High capacity when frame linked.
 Different load module types can be used in the
same mainframe.
 Dedicated parallel mode.
 Supports rack mount installation.
 Supports frame link connections, with up to 4
slave units.
 Color LCD display.
 120 different sets of programmable sequences.
 Accurate load simulation using Sequences.