GW Instek PEL-2000A Series - Select CP Mode

OPERATION
145
Ensure the menu is in CV Mode. See page 141.
ConfigureConfigure
Mode
CV
Response
Slow
Panel Operation
1. Press F3 (Response) to switch
between Fast and Slow response
speeds.
F3
Response
Slow
Response
Fast
Response speed settings will be
reflected in the Current Operation
Channel Status panel.
CVH
CH1
Slow
main
80V
CV Slow Response
CV Fast Response
Slow
Fast
Note
Changing the response speed will only affect the
current (active) channel. Other channels will not be
affected by any changes.
Select CP Mode
Background
The PEL-2000A series electronic load operates in
four different modes, Constant Current (CC),
Constant Resistance (CR), Constant Voltage (CV),
and Constant Power (CP).
CP mode cannot be used with the dedicated
Group Unit mode.
When a channel is active, the F1
key can be used to switch
between each operating mode.
F1