GW Instek PEL-2000A Series - Editing CV Parameters

PEL-2000A Series User Manual
142
ConfigureConfigure
Mode
CV
Response
Slow
Range
High
Changing the operating mode will only affect the
current (active) channel. Other channels will not be
affected by any changes.
Editing CV Parameters
Background
Constant Voltage mode can be set to a maximum
limit (Curr Limit). Using the current limit enables
limiting the current draw.
When using CV mode on single channel load
modules, two voltage levels can be set, A Value
and B Value. On a dual channel load module, only
one voltage level can be set per channel: A Value.
Ensure the menu is in CV Mode. See page 141.
ConfigureConfigure
Mode
CV
Response
Slow
Range
High
Parameters
A Value
0 ~ Setting Max V
B Value
0 ~ Setting Max V
Curr Limit
Load module dependent
Panel Operation
1. Use the Selector knob to
highlight A Value.