GW Instek PEL-2000A Series - Specifications

APPENDIX
305
Specifications
The specifications apply when the PEL-2000A series is powered on
for at least 30 minutes to warm-up to a temperature of 25°C ± 5°C ,
unless specified otherwise.
PEL-2002A
PEL-2004A
MODULE SLOTS
2
4
GENERAL
Operating Environment
Temperature
0°C to 40°C
Relative Humidity
0 to 85% RH
Altitude
Up to 2000m
Location
Indoor, no direct sunlight, dust free, almost non
conductive pollution.
Storage Environment
Temperature
-10°C to 70°C
Relative Humidity
< 90% RH
Location
Indoor
Power Supply
AC input voltage range: 100-120Vac / 200-240Vac
(90-132Vac / 180-250Vac)
Frequency: 47~63Hz
Power rating: PEL-2004A: 250VA Max
PEL-2002A: 150VA Max
Transient overvoltage on the main supply is
2500V.
Fuse
T3.15A/250V
Pollution degree
2
Measurement
Category
1
Rear panel USB class
USB 2.0 full speed (CDC-ACM)
Weight
Approx. 17.1kg
(Full modules)
Approx. 28.4kg
(Full modules)
PEL-2020A (100Wx2)
RANGE
Low
High
CURRENT
0~2A
0~20A
VOLTAGE
0~80V
MIN.OPERATING
VOLTAGE(dc)Typ.)
0.4V at 2A
0.8V at 20A
0.2V at 1A
0.4V at 10A