GW Instek PEL-2000A Series - Channel Configuration; Accessing the Configuration Menu

PEL-2000A Series User Manual
180
Channel Configuration
The Channel Configuration chapter describes the configuration
options for individual channels. Any configuration settings that are
changed only apply to the current channel, other channels will not
be changed.
Accessing the Configuration Menu
Background
The configuration menu is used to access
instrument settings and properties as well as set
the protection levels for each channel.
Panel operation
1. Select the channel to be
configured by pressing the
CHAN key and using the
Selector knob.
LOCAL
CHAN
2. Press the F5 (Configure) key to
enter the configuration
(Protection) menu.
F5
CCDH
Configure
Previous
Menu
Protection
Go-NoGo
CH1
Other
OCP Setting
OVP Level
OVP Setting
OPP Level
OPP Setting
OCP Level A
V
W
71.400
OFF
81.6
OFF
357.00
OFF
conf
Group
LOAD
USB
80V
06/15/18
16 : 50