GW Instek PEL-2000A Series - Configurations Description; Protection Modes

To Next Page

To Previous Page

PEL-2000A Series User Manual

Configurations Description

There are a number of different configurations for the PEL-2000A

series including protection modes, operating configurations, and

file system configurations. The Configuration Description section

describes what the different configurations are used for and how

they can be relevant to different operations.

Protection Modes

Background

The PEL-2000A series include a number of

protection modes: Over Current Protection, Over

Voltage Protection, Over Power Protection, Under

voltage protection and Constant Power Protection.

The protection modes are useful to protect both the

load modules and the DUT(s). A buzzer can be set

to notify when a protection setting has been

tripped. When a protection feature is activated

and has been tripped then the load unit will

display an alarm. The Mainframe will also display

an alarm. When an alarm has been tripped the load

will stop sinking current/voltage. There are three

Over load protection settings: ON, OFF and Clear.

CCDH

Configure

Protection

Go-NoGo

CH1

Other

OCP Setting

OVP Level

OVP Setting

OPP Level

OPP Setting

OCP Level A

5.075

OFF

81.6

29.75

OFF

Alarm

Conf

80V