GW Instek PEL-2000A Series - USB Interface Connection

PEL-2000A Series User Manual
290
Pin1
Ch1_GO/NG
Pin9
Ch5_GO/NG
Pin2
GND
Pin10
GND
Pin3
Ch2_GO/NG
Pin11
Ch6_GO/NG
Pin4
GND
Pin12
GND
Pin5
Ch3_GO/NG
Pin13
Ch7_GO/NG
Pin6
GND
Pin14
GND
Pin7
Ch4_GO/NG
Pin15
Ch8_GO/NG
Pin8
GO/NG_Enable
Connection Type
Open collector output maximum 30VDC with 1.1V
saturation voltage (100mA).
30 V DC (high)
Pass (Go) or SPEC Test:
OFF
1.1 V DC (low)
Fail (NoGo)
USB Interface Connection
Connection
For USB remote connection, use
the USB-B port on the
mainframe rear panel.