GW Instek PEL-2000A Series - Adjusting the Measure Period

OPERATION
227
Adjusting the Measure Period
Background
You can select a measure sample rate through this
setting. 200ms or 20ms are available for voltage
and current sampling rate.
Parameter
Measure Period
200ms/20ms
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5
ConfigureOther
Other Setting
High Resolution
System Mode
Von Latch Clear
Measure Period
Jog Shuttle Control
ON
0
Auto
200ms
OFF
Load Interface
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50
3. Use the Selector knob to
highlight Measure Period.
4. Press the Selector knob to edit
Measure Period, then turn to
change from 200ms to 20ms and
vice versa.
Measure Period 200ms