GW Instek PEL-2000A Series - Page 226

PEL-2000A Series User Manual
226
Note
This feature is only available when Von Latch is set to
ON.
Parameters
Von Latch Clear
Auto/Manual
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5
ConfigureOther
Other Setting
High Resolution
System Mode
Von Latch Clear
Measure Period
Jog Shuttle Control
ON
0
Auto
200ms
OFF
Load Interface
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50
3. Use the Selector knob to
highlight Von Latch Clear.
4. Press the Selector knob to edit
Von Latch Clear, then turn to
change from Auto to Manual
and vice versa.
Von Latch Clear Auto
5. Press the Selector knob or Enter to confirm
selection.