GW Instek PEL-2000A Series - Constant Resistance Mode

OPERATING DESCRIPTION
65
Current
Voltage
Level 1
Level 2
CC Mode: Dynamic:Go/NoGo
High
Low
Go NoGo
GO is specified as between the Low and High
Go/NoGo limits. NoGo is specified as outside the
Go/NoGo limits.
Constant Resistance Mode
Background
In Constant Resistance Mode the load units will
linearly sink current and voltage to match a set
resistance. CR mode has two different values
(single load modules), two different ranges and
rising and falling slew rates. Like CC mode,
Constant resistance mode supports both dynamic
and static loads. As with the other modes,
Go/NoGo is supported.
CR Mode
Load Input
Voltage
Load Current
Resistance